🍼Product Feature

📸 Can the Blemil baby monitor connect to multiple cameras?

👉 Yes. The monitor supports multiple camera connections and allows you to switch or use split-screen view, making it convenient to monitor multiple rooms or babies at the same time.

📡 What is the monitoring distance of Blemil Baby Monitor?

👉 The farthest distance can reach 1000ft (in unobstructed environment), fully covering ordinary households.

🌙 Is the night vision function on the Blemil baby monitor clear?

👉 Our Blemil baby monitor is equipped with high-definition infrared night vision, allowing for clear visibility of babies even in all-black environments.

🔋 What is the battery life of the Blemil Baby Monitor?

👉 The Blemil wireless video baby monitor lasts up to 8 hours on a full charge, with even longer standby time in ECO mode. The Blemil audio monitor is powered via outlet, while its parent unit also supports battery operation.

♻️ What's the ECO mode?

👉 ECO mode helps save power by automatically turning off the parent unit screen when there is no sound detected from your baby’s room. Once your baby makes noise, the screen and sound will turn back on instantly, allowing you to check in right away. This mode not only extends battery life but also ensures you won’t miss any important moments. Set the sensitivity level according to your needs, so even soft sounds like your baby’s breathing can be detected.

👶 What is crying detection?

👉 Cry detection is an intelligent feature designed to recognize your baby’s crying specifically. When your baby cries, the monitor will automatically light up the screen and send an alert, so you can respond immediately. Even if the screen is off or you’re in another room, you’ll always be notified in time to comfort your baby.

🔒 Security and Privacy

🔐 Will Blemil Baby Monitor be hacked?

👉 No. ❌ Blemil does not rely on WiFi 🌐 or Apps📱.
Instead, it uses an independent encrypted signal 🔑 with 2.4GHz FHSS frequency-hopping technology 📡 to establish a secure connection 🔒.
This effectively prevents interception 🚫 or interference ⚡, ensuring 100% privacy 🛡️ and security ✅ for you and your baby.

🛡️Does the Blemil baby monitor’s wireless signal have radiation?

👉 No need to worry 😊. The Blemil uses low-power wireless technology 🔋, with radiation levels far below international safety standards 🌍 and even much lower than common devices like mobile phones 📱.


It is safe and harmless 👶👨‍👩‍👧‍👦 for babies and families, so you can use it with confidence ✅.

⚙️Setting UP

❄️ How to deal with frozen display screen?

1️⃣ 🔌 Re-power the baby unit (unplug the adapter and then plug it back into the socket).
2️⃣ ♻️ To reset: the reset button is located on the back of the monitor stand and requires a small stick to operate. Press the RESET button on the back of the host (sometimes multiple resets are required to work)

🔊 How to deal with noise / feedback from the monitor?

When the monitor is too close to the camera, you may hear 📢 loud squealing, ⚡ buzzing, or background noise. This happens because the short distance creates a 🔁 sound loop (feedback).
👉 To avoid this, keep the monitor and camera at least 📏 3–5 meters apart and 🔉 lower the volume if necessary.

📡 How to connect the monitor with the camera?

Step 1: 🔌 Plug the camera into a power outlet (keep it always powered on).
Step 2: 📖 On the monitor, press the MENU key and select the camera icon.
Step 3: ➕ Choose Add Camera, then select Camera 1 or Camera 2.
Step 4: 🔄 When the “Pairing” message appears on the LCD screen, press and hold the PAIR button on the camera until pairing is complete.

✅ Once paired successfully, a ✔️ will appear on the screen.
⚠️ If unsuccessful, please repeat the above steps.

📶 How to deal with signal loss on the monitor?

1️⃣ 📡 Extend the antenna – Raise the antenna on top of the monitor to enhance signal reception.
2️⃣ ↔️ Reduce the distance – Move the camera closer to the monitor or reposition both devices for better stability.
3️⃣ 🚫 Avoid interference – Keep the camera and monitor away from other 2.4GHz electronic devices (such as microwaves, Wi-Fi routers, etc.).
4️⃣ 🧱 Remove obstacles – Clear obstructions between the monitor and camera. Materials like brick, concrete, and thick wood can significantly weaken the wireless signal.
5️⃣ ♻️ Try resetting – Perform a reset to check if the connection can be restored.